LevelOne GNS-8000B user manual

Disk Configuration/ RAID Configuration

English Display	Status Description
Ready	The status of current disk or disk configuration is normal
Unmounted	Hard disk is not installed or hard disk configuration is
	not configured
Not Active	RAID configuration is damaged and cannot be enabled
	When this message is shown, users should back up
	disk data immediately and replace the failed disk.
Uninitialized	Initialization fails
	Single disk does not support hot swap. If the hard
	disk is unplugged when GNS-8000B is turning on,
	disk configuration will be damaged and will lead to
	data loss.
In degraded mode	A disk of RAID 1 or RAID 5 configuration is unplugged or
	fails. RAID data protection mechanism fails.
	In this situation, users should back up disk data
	immediately and replace the failed disk to rebuild
	RAID configuration.

Note:

1.When R/W error is displayed for hard disk status, or “Not active” or “In degraded mode” is displayed for RAID configuration, please replace the hard disk immediately to ensure RAID data protection can work properly. LEVELONE is not responsible for any data loss caused by delay in replacing failed disks in a RAID configuration by users intentionally or unintentionally.

2.LEVELONE Systems, Inc. guarantees that all GNS-8000B (GNS-8000B) released have passed strict and complete QA test and can operate properly in normal condition. LEVELONE offers conditional and limited maintenance for GNS-8000B within warranty period. However, LEVELONE disclaims the responsibility for any data loss or damage, or business loss of users. In no event shall the liability of LEVELONE exceed the price paid for the product from direct, indirect, special, incidental, or consequential software, or its documentation.

- 123 -