The RZCPG will prompt you to stand within 3 feet of that controller. Press the right soft key 
(YES) to update your controller. NOTE:
It is important that you remain within 3 ft. of the controller you've selected from the list. If you are unsure about which controller you are updating you can use the "Who Is" command (see pg. 13). Leviton controllers will blink during the update process, confirming you are updating the correct controller. Update only one controller at a time.
x1
UPDATE
Please stand within 3 ft from controller and press YES
to continue
NOYES
x1
UPDATE
Node Updated! Node ID #4 Room controller
Return
Once the RZCPG confirms UPDATE it will display the updated node information. Press left soft
key 
(Return). Continue this process until all of your controllers have been updated. Each time you successfully update your controller it will be removed from the list. Once all of your controllers have been updated, press the right soft key 
to continue to the NEXT STEP.
STEP 4 Create Areas
NOTE: The INSTALL CHECKLIST screen will appear with the selection box around STEP 4 - Create Areas when NEXT STEP is chosen from STEP 2.
Press the center button 
to bring up the AREA screen. With
<<NEW >> selected press the center button 
to bring up the CREATE AREA screen. You can now name your new area by pressing the center button 
(refer to TEXT EDITOR pg. 6). Once you name your new area, press the center button 
to save the information and return to the CREATE AREA screen.
x1
INSTALL CHECKLIST
1.Include Dim/Swch
2.Include Controller
3.Update Controller
4.Create Areas
5.Set Associations
Back Next Step
x1
AREA
<< NEW >>
Back Next Step
x1
CREATE AREA
Name: Area #1
Add Devices...
8 | Cancel | Save |
|
|
