Leviton Programmer/Remote manual Replace Node, Refer to Text Editor

Select receive items Start? Press

data. Follow the prompts to complete this process.

NOTE: Update DB (no. 3 and 4) are only available on secondary RZCPG remotes.

x1

RX DATA

Setup Data

Areas

Profiles

3. Update DB (Man) is used	Back	Home
to manually perform a

database update (devices in the network, their names and types) for a secondary remote that has joined the network. It will require you to press buttons on each individual device you wish to update in your secondary remote.

4. Update DB (Aut) is used to perform an automatic database update (devices in the network, their names and types) for a secondary remote that has joined the network.

8. Replace Node

Use this option to replace		x1
non-operational devices in
		FAILED NODE
the network. Once the list is
		Building Node List
generated, you will press the
		Complete...65%
center button	to select
a device to replace. You will
be prompted to prepare the		Cancel
controller to be replaced or		x1
to press a button on a slave
device to be replaced when		REPLACE NODE
prompted. The button press		Bedroom
		Bathroom
will occur after you initiate
		Hall
the replacement process by		Room Controller
pressing the center button
on the RZCPG. After		Back	Home

replacement you can name the replacing device

(refer to TEXT EDITOR

pg. 6). Once your name is saved, you will receive confirmation that the node has been replaced.

x1

REPLACE NODE

Prepare replacing controller or press button on slave when prompted

x1

REPLACE NODE

Node replaced! Node ID# 8: Garage

Start? Press		More? Press
Back	Home	Back	Next Step

18