Lexicon SDP-40 manual Video Inputs and Outputs, Performance Composite & S-video, Other

SDP-40

Appendix

Video Inputs and Outputs

Video Inputs	5 composite (RCA),
	8 S-video, and
	4 component video
	(3 RCA, 1 BNC)
Video Outputs	4 composite (RCA,
	2 monitor and 2 record),
	4 S-video (2 monitor and
	2 record), and
	1 component (BNC)

Performance (Composite & S-video)

NTSC M, PAL, and SECAM compatible

Switching	Active
Output Level	1.0V peak-to-peak
Impedance	75Ω
Input Return Loss	>40dB
Differential Gain	<0.5%
Differential Phase	<0.5°
Bandwidth	>25MHz
K Factor	<0.3%
Gain	±0.15dB
Signal/Noise Ratio	>70dB
Frequency Response	10Hz to 10MHz + 0.1/
	-0.3dB

Performance (Component Video)

3-channel (Y, Pr, Pb), format-independent

SwitchingPassive

Impedance75Ω

Bandwidth>300MHz

Insertion Loss <3dB

Other

Microphone Inputs	4 3.5mm miniature phone
	jacks
Input sensitivity:	10mVrms (400mV
	maximum input level)
Input Impedance:	20kΩ (accepts balanced or
	unbalanced input
	signals)
Trigger Outputs	1 power on/off trigger,
	2 programmable triggers;
	+12 VDC, 0.5 amps each;
	detachable screw
	terminals
RS-232 Serial	2 9-pin D-sub connectors
Input/Output	for system control and
	software upgrades
Power Requirements	90-250 VAC, 50-60Hz,
	90W (universal line input),
	detachable power cord
Dimensions
Width:	17.3 inches (440mm)
Height:	6.63 inches (169mm)
Depth:	14.85 inches (377mm)
Weight	45lbs (20.5kg)
Rack Mounting	Brackets are available for
	mounting the unit in a
	standard 19 inch
	equipment rack

Other (continued)

Environment
Operating Temp:	0° to 35°C (32° to 95°F)
Storage Temp:	-30° to 75°C (-22° to
	167°F)
Relative Humidity:	95% maximum without
	condensation
Remote Control	Hand-held, battery-
	powered infrared remote
	control unit
Batteries:	Two AA

A-3