The MODE ADJUST Menu
JBL
5.1 BYPASS
MODE ADJUST 
5.1 BYPASS
•Designed for playback of
•When selected, the (L) input is sent to the FRONT L output. The (R) input is sent to the FRONT R output. The (C) input is sent to the CENTER output. The (SUB) input is sent to the SUBWOOFER L/R and LFE outputs. The (LS) input is sent to the SIDE and REAR L outputs. The (RS) input is sent to the SIDE and REAR R outputs.
The 5.1 BYPASS listening mode is not available unless, and will be automatically selected when, all of the following conditions are met:
•5 STEREO & 5.1 ANLG is selected on the REAR PANEL CONFIG menu (see page
•The ANALOG IN parameter on the INPUT SETUP menu is set to 5.1 ANALOG (see page
•The INPUT SELECT parameter on the MAIN ADV menu is set to either AUTO or ANALOG (see page
•The ANALOG BYPASS parameter on the MAIN ADV menu is set to ON (see page
| Default |
|
Parameter | Value | Values |
|
| |
OUTPUT LEVELS | See page | |
|
| |
CUSTOM | See page | |
An alphabetical listing of parameter descriptions begins on page
2-CHANNEL BYPASS
MODE ADJUST 
2CH BYPASS
•Designed for playback of
•When selected, the input signal bypasses internal processing and bypasses to the FRONT L/R outputs.
The 2CH BYPASS listening mode is not available unless, and will be automatically selected when, all of the following conditions are met:
•The ANALOG IN parameter on the INPUT SETUP menu is set to the connector utilized by the input source (see page
•The INPUT SELECT parameter on the MAIN ADV menu is set to either AUTO or ANALOG (see page
•The ANALOG BYPASS parameter on the MAIN ADV menu is set to ON (see page
No parameters are available for the 2CH BYPASS listening mode.
