Lexicon SDP-40 manual Stereo Inputs, Stereo & 5.1 Anlg

The SETUP Menu

JBL

MAIN MENU

MODE ADJUST AUDIO CONTROLS

SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

REAR PANEL CONFIG

8 STEREO INPUTS OR

5 STEREO & 5.1 ANLG

Note:

If 5 STEREO & 5.1 ANLG is selected on the REAR PANEL CONFIG menu, the unit will automatically select the 5.1 BYPASS listening mode if the following conditions are also met:

•The ANALOG IN parameter on the INPUT SETUP menu is set to 5.1 ANALOG (see page 3-6).

•The INPUT SELECT parameter on the MAIN ADV menu is set to either AUTO or ANALOG (see page 3-13). When set to AUTO, no digital input types can be present.

•The ANALOG BYPASS parameter on the MAIN ADV menu is set to ON (see page 3-13).

REAR PANEL CONFIG

The REAR PANEL CONFIG menu can be used to configure AUDIO INPUT pairs 1 to 8 on the rear panel. These inputs can be set up to function as eight stereo analog input pairs, or as five stereo analog input pairs and one 5.1-channel analog input.

8 STEREO INPUTS

SETUP REAR PANEL CONFIG 8 STEREO INPUTS

8 STEREO INPUTS is the default setting for REAR PANEL CONFIG. When set to 8 STEREO INPUTS, the AUDIO INPUTS are configured as eight stereo analog input pairs. Pairs 6, 7, and 8 are not available as a 5.1-channel analog input. Input types that are assigned to the 5.1-channel analog input will be reassigned to stereo input Pair 6.

5 STEREO & 5.1 ANLG

SETUP REAR PANEL CONFIG 5 STEREO & 5.1 ANLG

When set to 5 STEREO & 5.1 ANLG, the AUDIO INPUTS are configured as five stereo analog input pairs and one 5.1-channel analog input. The 5.1-channel analog input consists of AUDIO INPUT pairs 6, 7, and 8. Pair 6 becomes the front left and right (L)/(R) inputs. Pair 7 becomes the center (C) and subwoofer (SUB) inputs. And Pair 8 becomes the surround left and right (LS)/(RS) inputs. Input types that are assigned to stereo analog input pairs 6, 7, and 8 will be reassigned to the 5.1-channel analog input.

When selected for the Main Zone, these input signals are sent to the corresponding outputs. However, neither Zone 2 nor the Record Zone provide multi-channel outputs. If the 5.1-channel analog input is selected for Zone 2 or the Record Zone, only the front left and right (L)/(R) inputs will be available.

3-30