The SETUP Menu
MAIN MENU
MODE ADJUST AUDIO CONTROLS SETUP
SETUP
INPUTS SPEAKERS
REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
DVD1 INPUT SETUP
NAME |
| DVD1 | ||
DIGITAL IN | ||||
ANALOG IN | NONE | |||
ANLG IN LVL | AUTO | |||
VIDEO IN | ||||
COMPONENT IN |
| 1 | ||
L7 | FILM | |||
D | 5.1 L7 | FILM | ||
|
|
| dts L7 | FILM |
|
|
| ||
MAIN ADVANCED ZONE2 ADVANCED RECORD ADVANCED
DVD1 ZONE 2 ADV
INPUT SELECT | DIGITAL |
DVD1 is used as an example in this illustration, and will continue to be used as an example throughout this section. Whenever “DVD1” appears as a step in a menu path, any other input may be substituted.
INPUT SELECT | (AUTO, ANALOG, DIGITAL) | DIGITAL IN connector is utilized when a valid digital audio | ||||||
The INPUT SETUP menu allows the selection of two audio | input type is present. When invalid digital audio input | |||||||
connector types - one analog, one digital. INPUT SELECT specifies | types are received, the unit automatically switches to the | |||||||
how these connectors interact. The following settings are available: | ANALOG IN connector. INPUT SELECT will automatically | |||||||
|
| be set to AUTO when a connect or selected for both the | ||||||
• The DIGITAL setting forces the unit to utilize the DIGITAL | DIGITAL IN and ANALOG IN parameters. This setting is | |||||||
recommended for input sources that utilize both digital | ||||||||
IN connector for Zone 2. If an ANALOG IN connector is | ||||||||
and analog audio input types, such as a laser disc player. | ||||||||
also selected, it will be ignored. The unit will mute when | ||||||||
|
|
|
|
|
| |||
an invalid digital audio input type is received. Valid digital |
|
|
|
|
|
| ||
Note: |
|
|
|
|
| |||
audio input types include PCM, Dolby Digital, and |
|
|
|
|
| |||
Some sources supply valid digital audio input types | ||||||||
the DIGITAL setting in multiple zones. | that remain active even when no audio is present in | |||||||
|
| the signal. Because the unit recognizes these as valid | ||||||
• The ANALOG setting forces the unit to utilize the selected | digital audio | input types, | it will not | switch to | the | |||
ANALOG IN | connector. | For these | sources, | it is | ||||
ANALOG IN | connector for Zone 2. If a DIGITAL IN | |||||||
|
|
|
|
|
| |||
connector is also selected, it will be ignored. | recommended to configure two different inputs - one | |
for digital audio input types, and a second for analog | ||
| ||
| audio input types. |
•The AUTO setting allows the unit to switch between the selected DIGITAL IN and ANALOG IN connectors. The
