REAR PANEL (continued)
11The MICROPHONE INPUTS are provided for future expansion. Four 3.5mm T/R/S or balanced inputs are available.
12The TRIGGER OUTPUTS provide DC output. These outputs are available on a 5-pin DIN connector. The PWR trigger is on when the unit is on, and off when the unit is in standby or off. Triggers 1 and 2 can be configured in the TRIGGER SETUP menu (see page 3-35). The default trigger settings are preconfigured for use in JBL Synthesis systems with switching transducers for cinema and music modes.
GROUND
13The RS-232 Connector labelled 1 is provided for serial control and software upgrades. The RS-232 connector labelled 2 is provided for future expansion.
14The IR IN Connector is provided for input of infrared data from industry-standard infrared distribution equipment. A 3.5mm T/R/S input is available.
15A Removable Access Panel is provided for future expansion.
