
The SETUP Menu
JBL
MAIN MENU
MODE ADJUST AUDIO CONTROLS SETUP
SETUP
INPUTS SPEAKERS
REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
DVD1 INPUT SETUP
NAME |
| DVD1 | |||
DIGITAL IN | |||||
|
|
|
|
| |
ANALOG IN | NONE | ||||
ANLG IN LVL | AUTO | ||||
VIDEO IN | |||||
COMPONENT IN |
| 1 | |||
L7 | FILM | ||||
| D | 5.1 L7 | FILM | ||
|
|
|
| dts L7 | FILM |
|
|
|
| ||
MAIN ADVANCED
ZONE2 ADVANCED
RECORD ADVANCED
DVD1 ANALOG IN
NONE
* When REAR PANEL CONFIG |
is set to 5 STEREO & 5.1 |
ANLG (see page |
ANALOG will appear in |
DVD1 is used as an example in this illustration, and will continue to be used as an example throughout this section. Whenever “DVD1” appears as a step in a menu path, any other input may be substituted.
place of these menu items. |
ANALOG IN
SETUP
INPUTS
DVD1
ANALOG IN
Selecting ANALOG IN accesses the ANALOG IN menu, which can be used to assign the analog input connector for the selected input. The appearance of the ANALOG IN menu depends on the REAR PANEL CONFIG setting (see page
Note:
When ANALOG IN is set to NONE, the INPUT SELECT parameter on the MAIN ADV menu is automatically set to DIGITAL (see page
ANLG IN LVL
SETUP
INPUTS
DVD1
ANLG IN LVL
Selecting ANLG IN LVL accesses the ANLG IN LVL menu, which can be used to adjust analog input levels. Despite industry attempts at standardization, analog sources have a wide range of output levels. To compensate for this, each of the eight analog inputs on the unit can be assigned a different analog input level. This assures optimum performance regardless of source.
| Default |
|
Parameter | Value | Values |
|
|
|
AUTO | ON | ON, OFF |
|
|
|
MANUAL | +0dB | |
|
|
|
AUTO |
| (ON, OFF) |
AUTO provides automatic control of analog input levels. When set to ON, the unit monitors and automatically optimizes analog input