Lexicon SDP-40 manual Dolby Digital Status Menu, Bypass Status Menu, Analog Status Menu

SDP-40

The MODE ADJUST Menu

DOLBY DIGITAL STATUS MENU

The DOLBY DIGITAL STATUS menu will appear when a Dolby Digital listening mode is selected. It features L, C, R, SL, SR, and LFE level meters (see page 5-18 for more information).

Parameter	Values
CHANNELS	3/2.1, 3/2, 3/1, 2/2, 2/1, 2/0, 1/0
ENCODING	MATRIX, NONE
SAMPLE RATE	48kHz
REF OFFSET	-4dB

An alphabetical listing of parameter descriptions begins on page 5-20.

5.1 BYPASS STATUS MENU

The 5.1 BYPASS STATUS menu will appear when the 5.1 BYPASS listening mode is selected. It features L, C, R, SL, SR, and LFE level meters (see page 5-18 for more information).

Parameter	Values
INPUT	The name of the selected input
MODE	5.1 BYPASS
INPUT TYPE	BYP

An alphabetical listing of parameter descriptions begins on page 5-20.

5.1 ANALOG STATUS MENU

The 5.1 ANALOG STATUS menu features L, C, R, SL, SR, and LFE level meters (see page 5-18 for more information). It will appear when all of the following conditions are met:

•5 STEREO & 5.1 ANLG is selected on the REAR PANEL CONFIG menu (see page 3-30).

•The ANALOG IN parameter on the INPUT SETUP menu is set to 5.1 ANALOG (see page 3-6).

•The INPUT SELECT parameter on the MAIN ADV menu is set to either AUTO or ANALOG (see page 3-13). When set to AUTO, no digital input types can be present.

•The ANALOG BYPASS parameter on the MAIN ADV menu is set to OFF (see page 3-13).

Parameter	Values
INPUT	The name of the selected input
MODE	The name of the selected listening mode
INPUT TYPE	ANLG
SAMPLE RATE	96kHz

An alphabetical listing of parameter descriptions begins on page 5-20.

5-19