Lexicon SDP-40 Understanding Listening Mode Selection, Input Setup Menu, Mode Buttons, Music

Basic Operation

JBL

UNDERSTANDING LISTENING MODE SELECTION

There are three different methods of selecting listening modes in the Main Zone:

•The INPUT SETUP Menu

•The Mode up and down buttons on the front panel or the MODE +/- buttons on the remote control

•The Mode Family Selection Buttons on the remote control:

MUSIC

Listening mode selection only applies to the Main Zone.

INPUT SETUP MENU

This type of listening mode selection occurs each time a listening mode is changed in the INPUT SETUP menu, and each time an input is selected using the input selection buttons on the front panel or the remote control.

The INPUT SETUP menu can be used to select a preferred 2-channel, Dolby Digital, and dts(-ES) listening mode for each input. When an input type is recognized, the unit automatically defaults to the appropriate listening mode. (See page 3-3 for more information about the INPUT SETUP menu. See Section 5 for more information about listening modes.)

For example, the 2-CH parameter on the INPUT SETUP menu is set to LOGIC7 FILM and the DOLBY D parameter is set to 5.1 LOGIC7 MUSIC. When the input type changes from 2-channel to Dolby Digital, the listening mode will automatically change from LOGIC7 FILM to 5.1 LOGIC7 MUSIC.

MODE BUTTONS

This type of listening mode selection occurs each time the Mode Up and Down buttons are pressed on the front panel, or the MODE +/- buttons are pressed on the remote control. This type of mode scrolling allows auditioning of all listening modes available for the current input type.

Pressing the Mode Up/MODE + button selects the previous listening mode on the list. Pressing the Mode Down/MODE - button selects the next listening mode on the list. 2-channel listening modes are listed on page 3-10. Dolby Digital and dts(-ES) listening modes are listed on page 3-11. These lists are not visible on the on-screen and front panel displays during scrolling.

Note:

When the input type changes, the unit will automatically revert to the default listening modes selected in the INPUT SETUP menu. If USE LAST is selected in the INPUT SETUP menu when the input format changes, the unit will revert to the listening mode that was last used for the input type.

2-16