Lexicon SDP-40 manual Status Menus, 2CH Status Menu, 2CH Bypass Status Menu, Parameter Values

The MODE ADJUST Menu

JBL

STATUS MENUS

SHIFT then S T A T

Unlike other menus, the listening mode STATUS menu can only be accessed with the above remote control command sequence. Press the SHIFT button, then the STAT button to check the STATUS of the active listening mode at any time. Press the STAT button again to exit the menu. Use the MENU arrows for front panel display viewing of STATUS menu parameters.

STATUS menu parameters provide current information about the active input and the unit, and cannot be adjusted. These parameters will vary depending on whether a 2-channel, Dolby Digital, or dts(-ES) input type is present. 5.1 BYPASS and 2CH BYPASS input types have individual STATUS menus. Additionally, the 5.1 ANALOG STATUS menu will appear when certain conditions are met.

Level Meters

All listening mode STATUS menus feature level meters, which indicate fluctuating input levels in the left (L), center (C), right (R), surround left (SL), surround right (SR), surround back (SB), and LFE channels. Different combinations of level meters appear on each STATUS menu. Only the L and right R level meters appear on the 2CH STATUS menu. The SB level meter will not appear unless a 6.1-channel input type is present.

All level meters appear in combinations of green, yellow, and red on the blue-screen background. Green indicates normal input levels; yellow indicates the onset of overload; and red indicates overload. The yellow arrow to the right of each bar indicates the current input peak level.

2CH STATUS MENU

The 2CH STATUS menu will appear when a 2-channel listening mode is selected. It features L and R level meters (see previous column for more information).

Parameter	Values
INPUT	The name of the selected input
MODE	The name of the selected listening mode
INPUT TYPE	ANLG, DOLBY D, PCM
SAMPLE RATE	44.1kHz, 48kHz, 88.2kHz, 96kHz

An alphabetical listing of parameter descriptions begins on page 5-20.

2CH BYPASS STATUS MENU

The 2CH BYPASS STATUS menu will appear when the 2CH BYPASS listening mode is selected. It features L and R level meters (see previous column for more information).

Parameter	Values
INPUT	The name of the selected input
MODE	2CH BYPASS
INPUT TYPE	BYP

An alphabetical listing of parameter descriptions begins on page 5-20.

5-18