Load up to

20 sheets of banner paper

100 sheets of custom-size paper (depending on the thickness)

Make sure

You remove all the paper from the paper support before loading the banner paper.

You tear off only the number of pages needed to print the banner.

The banner paper is placed on a level surface behind the printer and fed up over the paper support.

You have selected the correct paper size for the banner in Print Properties. For more information, see “Using Print Properties” on page 16.

The paper is loaded against the right side of the paper support.

The paper guide rests against the left edge of the paper.

The print side of the paper faces you.

The paper size fits within these dimensions: Width:

76–216 mm

3.0–8.5 inches

Length:

127–432 mm

5.0–17.0 inches

The paper is loaded against the right side of the paper support.

The paper guide rests against the left edge of the paper.

22

Page 22
Image 22
Lexmark 1300 Series manual Load up to