Maintaining the printer
Warning—Potential Damage: Failure to maintai n optimum printer performance, or to replace parts an d supplies,
may cause damage to your printer.

Storing supplies

Choose a cool, clean storage area for the printer supplies . Store supplies right side up in their origi nal packing until you
are ready to use them.
Do not expose supplies to:
Direct sunlight
Temperatures above 35°C (95°F)
High humidity above 80%
Salty air
Corrosive gases
Heavy dust

Cleaning printer parts

Cleaning the printer

Note: You may need to perform this task after ever y few months.
Warning—Potential Damage: Damage to the printer caused by improper handling is not covered by the printer
warranty.
1Make sure that the printer is turned off and unplugged from the electrical outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of th e printer,
unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
2Remove paper from the standard bin, multipurpose feeder, and manu al feeder.
3Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.
4Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
5Make sure all areas of the printer are dry before sending a new print job.
Maintaining the printer 135