Lexmark Copying on letterhead

4Navigate to:
Copy to > > select the tray containing the transparencies > > select the number of copies or enter a number
on the keypad >
5If there are no trays that contain transparencies, then do the following:
aNavigate to:
Copy to > > Manual Feeder > > select the size of the transparencies > > Transparency >
bLoad transparencies into the multipurpose feeder, and then press .
Note: If you want to copy another document, then place it on the scanner g lass, press the left or right arrow
button to scroll to Scan the Next Page, and then press .
6Press the left or right arrow button to scroll to Finish the Job, an d then press .
Copying on letterhead
1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•Do not load postcards, photos, small items, transparencies, photo paper , or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•The ADF indicator light comes on when the paper is loaded properly.
2If you are loading a document into the ADF tray, then adjust the paper guides.
3From the printer control panel, navigate to:
> Copy > > Copy from > select the size of the original document
4Navigate to:
Copy to > > select the tray containing the letterhead > > select the number of copies or enter a number
on the keypad >
5If there are no trays that contain letterhead, then do the following:
aNavigate to:
Copy to > > Manual Feeder > > select the size of the letterhead > Letterhead
bPlace the letterhead faceup, top edge first into the multipurpose feeder, and then press .
Note: If you want to copy another document, then place it on the scanner g lass, press the left or right arrow
button to scroll to Scan the Next Page, and then press .
6Press the left or right arrow button to scroll to Finish the Job, an d then press .
Copying 62