Lexmark Placing information on copies

3From the printer control panel, navigate to:
> Copy > > Separator Sheets
4Select Between Copies, Between Jobs, Between Pages, or Off.
5Select the number of copies or enter a number on the keypad, and then press .
Note: If you want to copy another document, then place it on the scanner g lass, press the left or right arrow
button to scroll to Scan the Next Page, and then press .
6Press the left or right arrow button to scroll to Finish the Job, an d then press .
Copying multiple pages onto a single sheet
To save paper, you can copy either two or four consecutive pages of a multiple‑page document ont o a single sheet of
paper.
Notes:
•Make sure the paper size is set to letter, legal, A4, or JIS B5.
•The copy size must be set to 100%.
1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•Do not load postcards, photos, small items, transparencies, photo paper , or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•The ADF indicator light comes on when the paper is loaded properly.
2If you are loading a document into the ADF tray, then adjust the paper guides.
3From the printer control panel, navigate to:
> Copy > > Paper Saver > select the setting that you want
4Select Off, 2‑up Portrait, 2‑up Landscape, 4‑up Portrait, or 4‑up Landscape.
5Select the number of copies or enter a number on the keypad, and then press .
Note: If you want to copy another document, then place it on the scanner g lass, press the left or right arrow
button to scroll to Scan the Next Page, and then press .
6Press the left or right arrow button to scroll to Finish the Job, an d then press .
Placing information on copies
Placing an overlay message on each page
1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 67