Loading paper and specialty media
Proper selection and loading of media can improve how reliably documents print. For more information, see “Avoiding
jams” on page 163 and “Storing paper” on page 49.

Setting the paper size and type

1From the printer control panel, navigate to:
> Settings > > Paper Menu > > Paper Size/Type >
2Press the up or down arrow button to select the tray or feeder, and then press .
3Press the up or down arrow button to select the paper size, and the n press .
4Press the up or down arrow button to select the paper type, and then pr ess to change the settings.

Configuring Universal paper settings

The Universal paper size is a userdefined setting that lets you print on paper sizes that are not pre set in the printer
menus.
Notes:
The smallest supported Universal size is 76 x 127 mm (3 x 5 inches) and is loaded only in the multipurpose
feeder and manual feeder.
The largest supported Universal size is 215.9 x 359.9 mm (8.5 x 14.17 inches) and is loaded only in the
multipurpose feeder and manual feeder.
1From the printer control panel, navigate to:
> Settings > > Paper Menu > > Universal Setup >
2Press the up or down arrow buttons to scroll to Units of Measure, Portrait Height, or Portrait
Width, and then press .
3Enter the preferred settings using the keypad, and then press .
4Press .

Loading the 250sheet tray

The printer has a 250-sheet tray (Tray 1) with an integrated manual feeder. The 250-sheet tray and the 650-sheet duo
tray support the same paper sizes and types and are loaded in the same way.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
1Pull out the tray completely.
Loading paper and specialty media 33