Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2Click Settings > Print Settings > Quality Menu > Toner Darkness.
3Adjust the toner darkness, and then click Submit.
Using the printer control panel
1From the printer control panel, navigate to:
> Settings > > Print Settings > > Quality Menu > > Toner Darkness
2Adjust the toner darkness, and then press .
Using Max Speed and Max Yield
Max Speed and Max Yield let you choose between a faster print speed and a higher toner yield. Max Yield is the factory
default setting.
Max Speed—This lets you print in either black or color depending on the setting in the printer driver. The printer
prints in color unless Black Only is selected in the printer driver.
Max Yield—This lets you switch from black to color based on the color content found on each page.
Note: Frequent color mode switching can result to slower printing if the content of the pages is mixed.
Using the Embedded Web Server
1Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2Click Settings > Print Settings > Setup Menu.
3From the Printer Usage list, select Max Speed or Max Yield.
4Click Submit.
Using the printer control panel
1From the printer control panel, navigate to:
> Settings > > Settings > > Print Settings > > Setup Menu > > Printer Usage >
2Select Max Speed or Max Yield, and then press .
Printing from a mobile device
To download a compatible mobile printing application, visit www.lexmark.com/mobile.
Printing 55