Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
SMTP server not set up. Contact system administrator.
From the printer control panel, press to clear the message.
Note: If the message appears again, then contact your system suppor t person.
Standard network software error [54]
Try one or more of the following:
From the printer control panel, select Continue to cont inue printing. For nontouchscreen printer models, press
to confirm.
Turn off the printer and then turn it back on.
Update the network firmware in the printer or print server. For more information, visit the Lexmark suppo rt Web
site at http://support.lexmark.com.
Standard USB port disabled [56]
From the printer control panel, select Continue to clear the message. For nontouchscreen printer models, press
to confirm.
Notes:
The printer discards any data received through the USB port.
Make sure the USB Buffer menu is not set to Disabled.
Supply needed to complete job
Try one or more of the following:
From the printer control panel, touch Prompt for supplies to view all error messages that indicate what supplies
are needed to continue processing the current job. For non touchscreen printer models, press to clear the
message and continue printing.
1Order the missing supply immediately.
2Install the supply. For more information, see the instruction sheet that came with the sup ply.
Cancel the print job, then install the missing supply, and then resend th e print job.
Too many flash options installed [58]
1Turn off the printer.
2Unplug the power cord from the electrical outlet.
3Remove the extra flash memory.
Troubleshooting 190