Installing options
Adding a memory card
The system board has one connector for an optional memory card.
CAUTION: If you are installing a memory card after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing.
Note: Memory options designed for other Lexmark printers may not work with your printer.
1Access the system board (see Accessing the system board on page 30).
2Push open the latches on both ends of the memory connector.
3 Unpack the memory card.
Warning: Memory is easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card.
Avoid touching the connection points along the edge of the card.
4Align the notches on the bottom of the card with the notches on the connector.
5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6Make sure each latch fits over the notch on each end of the card.
7Close the side access door.
8Close the rear exit.
9Close the front door.
Adding a flash memory card
The system board has two connectors for an optional flash memory card.
CAUTION: If you are installing a flash memory card after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing.
Note: Flash memory card options designed for other Lexmark printers may not work with your printer.
1 Access the system board (see Accessing the system board on page 30).
2 Unpack the flash memory card.
Warning: Flash memory is easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a flash memory card.
Avoid touching the connection points along the edge of the card.
Adding a memory card
33
