Administrative support
Enabling control panel menus
1Turn the printer off.
2Press and hold 
and 
while turning the printer on.
3Release both buttons when Performing Self Test appears on the display.
The printer performs its
4Press 
until 
Panel Menus appears, and then press 
.
5Press 
until 
Enable appears, and then press 
.
The following messages appear briefly in succession: Submitting Selection and Enabling Menus.
The control panel returns to Panel Menus.
6Press 
until 
Exit Config Menus appears, and then press 
.
Activating Menu Changes appears. The menus are enabled.
Resetting the Printer appears briefly followed by a clock. The control panel then returns to Ready.
Restoring factory default settings
When you first enter the printer menus from the control panel, you may notice an asterisk (*) to the left of a value in the menus. This asterisk indicates the factory default setting. These settings are the original printer settings. (Factory defaults may vary for different regions.)
When you select a new setting from the control panel, Submitting Selection appears. When the Submitting Selection message disappears, an asterisk appears next to the setting to identify it as the current user default setting. These settings are active until new ones are stored or the factory defaults are restored.
To restore the original printer factory default settings:
Warning: All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) will be deleted. (Resources residing in flash memory or on the optional hard disk remain unaffected.)
1Make sure the printer is on and Ready appears on the display.
2Press 
on the control panel.
3Press 
until 
Settings appears, and then press 
.
4Press 
until 
Setup Menu appears, and then press 
.
5Press 
until 
Factory Defaults appears, and then press 
.
6Press 
until 
Restore Now appears, and then press 
.
7The message Restoring Factory Defaults appears, followed by the Ready message. When you select Restore:
•No other button actions are available on the control panel while Restoring Factory Defaults appears.
•All menu settings return to the factory default values, except:
–The control panel Display Language setting in the Setup menu.
–All settings in the Parallel menu, Network menu, and USB menu.
Enabling control panel menus
61
