Maintaining the printer
Conserving supplies
Several settings in your application software or on the display let you conserve toner and paper. For more information on changing these settings, see the Menus and Messages Guide.
Supply | Menu selection item | What the setting does |
Toner | Toner Darkness in the | Lets you adjust the level of toner released on a sheet of print media. The |
| Defaults Æ Quality Menu | values range from 1 (lightest setting) to 10 (darkest setting). |
|
|
|
Print media | Multipage Print in the | Causes the printer to print the two or more page images on one side of a |
| Defaults Æ Finishing Menu | sheet. Values for Multipage Print are 2 Up, 3 Up, 4 Up, 6 Up, 9 Up, 12 Up, |
|
| and 16 Up. Combined with the duplex setting, Multipage Print lets you print |
|
| up to 32 pages on one sheet of paper (16 images on the front and 16 on the |
|
| back). |
|
|
|
| Duplex in the Defaults Æ | Duplex printing lets you print on both sides of a sheet of paper. |
| Finishing Menu |
|
|
|
|
| Use your software application | Lets you examine the first copy of a |
| or printer driver to send a | satisfactory before you print the other copies. If the job is unsatisfactory, |
| Verify Print job. | you can cancel the job. |
|
| See Printing and deleting held jobs on page 28 for more information |
|
| about a Verify Print job. |
|
|
|
Ordering supplies
To order supplies in the U.S., contact Lexmark at
Conserving supplies
37