Lexmark 450dn manual Clearing jams, Clearing printer jams

Clearing jams

3Lift the flap at the front of the printer, and remove the jammed pages beneath the flap.

4Open the rear exit, and remove the jammed pages.

CAUTION: Fuser or fuser area may be hot.

5After you have cleared the jams, reinstall the print cartridge assembly, and make sure all printer doors and trays are closed.

6Press .

Note: Jam recovery is set to Auto by default. When jam recovery is set to Auto, the memory that holds the image of a page may be re-used after the page is printed but before it has successfully exited the printer if that memory is needed for another use. Therefore, a jammed page may or may not be reprinted, depending on the overall memory usage in the printer.

7Load one sheet of the print media.

8Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.

9Press .

Clearing printer jams

50