Lexmark CX410 Security Audit Log menu, Set Date and Time menu, Understanding printer menus 146

Understanding printer menus 146

Security Audit Log menu

Use	To
Export Log	Let an authorized user export the security audit log.
	Note: The log can be downloaded from the Embedded Web Server and saved on a
	computer.
Delete Log	Specify whether audit logs are deleted.
Yes	Note: Yes is the factory default setting.
No
Configure Log	Specify how audit logs are configured.
Enable Audit	Notes:
Yes
	• Enable Audit determines if events are recorded in the secure audit log and
No
	remote syslog. No is the factory default setting.
Enable Remote Syslog
	• Enable Remote Syslog determines if logs are sent to a remote server. No is the
No
	factory default setting.
Yes
	• Remote Syslog Facility determines the value used to send logs to the remote
Remote Syslog Facility
	syslog server. 4 is the factory default setting.
0–23
	• If the security audit log is activated, then the severity value of each event is
Severity of events to log
	recorded. 4 is the factory default setting.
0–7

Set Date and Time menu

Use	To
Current Date and Time	View the current date and time settings for the printer.
Manually Set Date and Time	Enter the date and time.
[input date/time]	Notes:
	• Manually setting the date and time sets Enable NTP to No.
	• The wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM format.
Time Zone	Select the time zone.
[list of time zones]	Note: GMT is the factory default settings.
Automatically observe DST	Set the printer to use the applicable daylight saving time (DST) start and end times
On	associated with the printer Time Zone setting.
Off	Note: On is the factory default setting.
Enable NTP	Enable Network Time Protocol, which synchronizes the clocks of devices on a
On	network.
Off	Notes:
	• On is the factory default setting.
	• This setting is turned off if you manually set the date and time.