Lexmark CX410 manual PCL Emul menu, Understanding printer menus 194

Understanding printer menus		194
	Use	To
	Image Smoothing	Enhance the contrast and sharpness of low‑resolution images and smoothen
	On	their color transitions.
	Off	Notes:
		• Off is the factory default setting.
		• Image Smoothing has no effect on images that are 300 dpi or higher in
		resolution.
PCL Emul menu
	Use	To
	Font Source	Specify the set of fonts used by the Font Name menu.
	Resident	Notes:
	Disk
		• “Resident” is the factory default setting. Resident shows the factory
	Download
		default set of fonts downloaded in the RAM.
	Flash
		• “Flash” and “Disk” settings show all fonts resident in that option.
	All
		• The flash option must be properly formatted and cannot be read/write‑,
		write‑, or password‑protected.
		• “Download” shows all the fonts downloaded in the RAM.
		• “All” shows all fonts available to any option.
	Font Name	Identify a specific font and the option where it is stored.
	Courier 10	Note: Courier 10 is the factory default setting. Courier 10 shows the font
		name, font ID, and the storage location in the printer. The font source
		abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
	Symbol Set	Specify the symbol set for each font name.
	10U PC‑8	Notes:
	12U PC‑850	• 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
		factory default setting.
		• A symbol set is a set of alphabetic and numeric characters, punctuation,
		and special symbols. Symbol sets support the different languages or
		specific programs such as math symbols for scientific text. Only the
		supported symbol sets are shown.
	PCL Emulation Settings	Change the point size for scalable typographic fonts.
	Point Size	Notes:

1.00–1008.00

•12 is the factory default setting.

•Point size refers to the height of the characters in the font. One point equals approximately 0.014 inch.

•Point sizes can be increased or decreased in 0.25‑point increments.