Lexmark CX410 manual Understanding printer menus 155, Error Recovery, Print Recovery

Understanding printer menus		155
	Use	To
	Timeouts	Set the amount of time in seconds the printer waits for user
	Job Hold Timeout	intervention before it holds jobs that require unavailable resources
	5–255	and continues to print other jobs in the print queue.
		Notes:
		• 30 is the factory default setting.
		• This menu item appears only when a formatted, working
		printer hard disk is installed.
	Error Recovery	Set the printer to restart when an error is encountered.
	Auto Reboot	Note: “Reboot always” is the factory default setting.
	Reboot when idle
	Reboot always
	Reboot never
	Error Recovery	Determine the number of automatic reboots the printer can
	Max Auto Reboots	perform.
	1–20	Notes:
		• 5 is the factory default setting.
		• If the printer performs a number of automatic reboots that is
		the same as the menu setting within a certain amount of
		time, then the printer shows the applicable error instead of
		restarting.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when not resolved within the specified time period.
	Disabled	Note: Disabled is the factory default setting.
	5–255
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	On
		• Auto is the factory default setting. The printer reprints
	Off
		jammed pages unless the memory required to hold the
	Auto
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.
	Print Recovery	Print a page that may not have printed otherwise.
	Page Protect	Notes:
	Off
		• Off is the factory default setting. This prints a partial page
	On
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.