Lexmark CX410 manual Understanding printer menus 153, Contact Name, Location, Alarms, Timeouts

Understanding printer menus			153
	Use	To
	Contact Name	Specify a contact name for the printer.
		Note: The contact name is stored on the Embedded Web Server.
	Location	Specify the location of the printer.
		Note: The location is stored on the Embedded Web Server.
	Alarms	Set an alarm when the printer requires operator intervention.
	Alarm Control	When activated, Alarm Control lets you set the number of times
	Cartridge Alarm	that the alarm sounds, while Cartridge Alarm lets you stop printing
		when a cartridge-low condition occurs.
		For each alarm type, select from the following options:
		•	Off
		•	Single
		•	Continuous
		Notes:
		• Single is the factory default setting for Alarm Control and
			Cartridge Alarm. This sounds three quick beeps.
		• Off means no alarm will sound.
		• Continuous repeats three beeps every 10 seconds.
	Timeouts	Specify the number of minutes of inactivity before the printer
	Standby Mode	enters a lower power state.
	Disabled	Note: 15 is the factory default setting.
	1–240
	Timeouts	Set the amount of time in seconds the printer waits after a job is
	Sleep Mode	printed before it goes into a reduced power state.
	Disabled	Notes:
	1–120	• 30 is the factory default setting.
		• Disabled appears only when Energy Conserve is set to Off.
		• Lower settings conserve more energy, but may require
			longer warm‑up times.
		• Select a high setting if the printer is in constant use. Under
			most circumstances, this keeps the printer ready to print
			with minimum warm‑up time.
	Timeouts	Set the printer to operate at a low power state.
	Hibernate Timeout	Notes:
	Disabled
		• Disabled is the factory default setting for Class A and Class B
	1–3 hours
			printers in all countries except for European Union countries
	6 hours
			and Switzerland.
	1–3 days
		• “3 days” is the factory default setting for Class B printers in
	1–2 weeks
			all European Union countries and Switzerland.
	1 month