Lexmark CX410 manual Understanding printer menus 164

Understanding printer menus		164
	Use	To
	Dialing Prefix Rules	Establish a dialing prefix rule.
	Prefix Rule [x]
	Automatic Redial	Specify the number of times the printer tries to send the fax to a specified number.
	0–9	Note: 5 is the factory default setting.
	Redial frequency	Specify the number of minutes between redials.
	1–200	Note: 3 is the factory default setting.
	Behind a PABX	Enable or disable switchboard blind dialing without a dial tone.
	Yes	Note: No is the factory default setting.
	No
	Enable ECM	Enable or disable Error Correction Mode for fax jobs.
	Yes	Note: Yes is the factory default setting.
	No
	Enable Fax Scans	Fax files that are scanned at the printer.
	On	Note: On is the factory default setting.
	Off
	Driver to fax	Allow the printer driver to send fax jobs.
	Yes	Note: Yes is the factory default setting.
	No
	Allow Save as Shortcut	Save fax numbers as shortcuts in the printer.
	On	Note: On is the factory default setting.
	Off
	Dial Mode	Specify the dialing sound, either as a tone or a pulse.
	Tone	Note: Tone is the factory default setting.
	Pulse
	Max Speed	Specify the maximum speed in baud at which faxes are sent.
	2400	Note: 33600 is the factory default setting.
	4800
	9600
	14400
	33600
	Custom Job scanning	Scan a document that contains mixed paper sizes into a single file.
	On	Notes:
	Off
		• Off is the factory default setting.
		• This menu item appears only when a formatted, working printer hard disk is
		installed.
	Scan Preview	Show a preview on the display for scan jobs.
	On	Notes:

Off

•Off is the factory default setting.

•This menu item appears only when a formatted, working printer hard disk is installed.