Lexmark CX410 manual Replace unsupported type imaging kit 32.xy, Replace waste toner bottle 82.xy

Troubleshooting 269

Replace unsupported [type] imaging kit [32.xy]

Note: The type can be a black imaging kit, or a black and color imaging kit.

Remove the indicated imaging kit, and then install a supported one to clear the message.

Note: If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the User’s Guide or visit www.lexmark.com.

Replace waste toner bottle [82.xy]

Replace the waste toner bottle to clear the message.

Restore held jobs?

Try one or more of the following:

•Select Restore on the printer control panel to restore all held jobs stored in the printer hard disk. For

non‑touch‑screen printer models, press to confirm.

•Select Do not restore if you do not want any print jobs to be restored. For non‑touch‑screen printer models, press

to confirm.

Scanner automatic feeder cover open

Close the ADF cover.

Scanner disabled by admin [840.01]

Print without the scanner, or contact your system support person.

Scanner disabled. Contact system administrator if problem persists. [840.02]

From the printer control panel, try one or more of the following:

•Select Continue with scanner disabled to return to the home screen, and then contact your system support person.

•Select Reboot and automatically enable scanner to cancel the job.

Note: This attempts to enable the scanner.

•For non‑touch‑screen printer models, press to confirm.

Scanner jam, remove all originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner jam, remove jammed originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.