Lexmark CX410 manual Scenario 3 VoIP telephone service

Faxing 99

Scenario 3: VoIP telephone service

To connect:

1Connect one end of the telephone cable that came with the printer to the port of the printer.

2Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.

Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port.

3Connect the telephone to the port of the printer.

Tips for this setup:

•To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.

•If you need two phone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second phone port. You can use a phone splitter. Plug the phone splitter into the port labeled Phone Line 1 or Phone Port, and then plug the printer and telephone into the splitter.

Note: Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.