Installation
DVD
@ Connect the video outputs (Y. PB. PR'}of the DVD to the COMPONENT IN VIDEO jacks on the set.
Connect the audio outputs of the DVD tothe COMPONENT IN AUDIO jacks on the set.
Turn on the DVD player, insert a DVD.
Select Component 1 input source with using the INPUT button on the remote control.
- If connected to COMPONENT IN2. select Component 2 input source.
Refer to the DVD player's manual for operating instructions.
- Component Input porte
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component portson theTV
Video output ports
on DVD player
22