Reference
i
Pr og r am m ng t:he Re m ot:e
The remote control isa multi-brand or universal remote control. It can be programmed to operate most
remote-controllable devices of other manufacturers.
Note that the remote control may not control all models of other brands.
TV INPUT INPUT

[.- i ° F_S"Bd

EZPIC EZSOUND SAP CC
CCC) CCD CCC)CCC)
ADJUST
(ZD
2
3
4
5
6
Testyour remote control.
To find out whether your remote control can operate the component
without programming, turn on the component such as a VCR and press
the corresponding MODE button (VCR) on the remote control, while
illuminating on the selected component. Test the POWER button to see
if the component responds properly. If not, the remote requires pro-
gramming to operate the device.
Turn on the component tobe programmed, thenpress the correspond-
ing MODE button onthe remote control.
Press the MENU and MUTE buttons simultaneously for2 seconds, the
button selected component lights on the remote control. Ifyou don't
press any button for 20seconds, the button selected component will turn
off on the remote control. At a moment, you have to repeat from step 2.
Enter a code number using the number buttons on the remote. When
pressing the button, the light is blinked at a time. Programming code
numbers for the corresponding component can be found on the follow-
ing pages. Again, if thecode is correct, the device will turn off.
Press the MENU button to store the code. After blinking twice, this code
isstored.
Test the remote control functions tosee if the component responds
properly. Ifnot, repeat from step 2.
61