C A R E A N D C L E A N I N G O F T H E R A N G E
BURNER CAPS AND HEADS
•DO NOT use bleach on product to clean.
BURNER CAPS
Lift off when cool. Wash burner caps in hot, soapy water and rinse with clean water. To remove burned on food particles, you may scour with a plastic scouring pad.
If you want to remove
NOTES:
•DO NOT use steel wool or scouring powders to clean the burners.
•Burners will not light if the cap is removed.
Burner cap is | Burner cap is NOT |
properly seated. | properly seated. |
BURNER HEADS AND OVAL (CENTER) BURNER HEAD/CAP ASSEMBLY
AFTER CLEANING
Before replacing the burner caps and burner heads shake out excess water and then dry them thoroughly.
REPLACEMENT
Replace burner heads and caps over the electrodes on the cooktop, in the correct locations according to their size.
The burner heads and the oval burner head/cap assembly are removable. Simply lift them off the range for cleaning. For even and unhampered flame, the slits in the burner heads must be kept clean at all times. Clogged or dirty burner ports or electrodes will not allow the burner to operate properly.
Any spill on or around an electrode must be carefully cleaned. Take care to not hit an electrode with anything hard or it could be damaged.
You should clean the burner caps and heads routinely, especially after bad spillovers which could clog the openings. Lift them off when they are cool.
Oval (Center) Burner
Head/Cap Assembly
Small burner head and cap
Medium burner head and cap
Large burner
head and capExtra large burner head and cap
Make sure the hole in the burner head is positioned over the electrode.
Hole
Electrode
26