Mounting the Lens | LG Electronics LVC-SX703PC/OC/MC specification

LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 12

Mounting the Lens

1

2-2

3

2-1

1.Remove the lens mount cap from the camera.

2.Install the auto-iris lens.

2-1. CS mount type lens

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

2-2. C mount type lens

To allow for flange- back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully align the lens mount with the camera opening and turn the lens slowly to install it.

3.Connect the lens plug to the lens iris output connector (LENS) on the side of the camera. When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.

In such a case, remove the original plug and using a soldering iron, connect a lens iris plug according to the diagram. (Refer to next page.)

12

Image 12

LG Electronics LVC-SX703PC/OC/MC, LVC-SX703PB/OB/MB instruction manual Mounting the Lens, Mount type lens

Contents

Color Video Camera LVC-SX703PB/OB/MB Risk of Electric Shock Do not Open Important Safety Instructions Manufacturer Contents and Features Features Chart Power Source Is operated with Line lock mode Remove dust or dirt on the surface of the lens with a blower Installing a lens sold separately Part Names and FunctionsLens mount cap Bracket can be fixed at the top or bottom of the camera. Power input terminal Power indicatorExternal Device Connectors RS-485 Connector ALC Lens Setting Switch Lens iris output connector LensButtons for menu Tons on the side panel. Connecting the monitor Insert the plug of this power cord into a wall outletConnections Basic connection Mounting the Lens Mount type lens Concerning Auto-Iris Lenses DC type auto-iris lensVideo type auto-iris lens ELC type auto-iris lens Alarm Connection External Device ConnectionsRS-485 Connection Multi-Input Connection Flange-back Adjustment Installation of Camera Menu Operation To Open and Exit the Menu screen Exit the menu screen Language and Camera Identification Settings Language SettingCamera Identification Setting Exposure Settings Brightness SettingYou can set the brightness level levels Automatic Gain Control AGC setting Exposure Shutter Speed Setting Shutter Flickerless Setting FlikerlessUse for removing the flicker of picture BLC/WDR Setting You can set the exposure options using the Exposure menuUse BLC/WDR option to set the options for BLC or WDR camera Use or button to select BLC/WDR option BLC/WDR User Level Area Bottom White Balance Settings Setting the WB White Balance Mode WB Mode Push Auto Day/Night Setting Motion Detector Setting Motion DET Detection Area SensitivityCondition Privacy Masking Setting Privacy Mask Special Menu Settings Special Setting the digital effect Effect Effect OFF Setting the digital zoom D-ZOOM Naming the camera USER-TITLERepeat to set the remain characters Setting the title display Setting the HOT KEY Synchronization Setting Sync Setting the Pix Mapping Commands Stop command is 0xC5, 0x5F, 0x0C, 0x00, ID, C.SRS-485 Protocol Data Communication Format Specifications Electric Shutter 50 1/100,000 Auto Mode White Balance Power ConsumptionStorage Temperature Weight