Motion Detector Setting (MOTION DET)
4/15
7/15
4/15
TOP
LEFT CENTER RIGHT
BOTTOM
1/3 1/3 1/3
Detection Area
This camera has an alarm function. When the picture changes, the internal switch is closed.
•Sensitivity
Motion is detected when the accumulated value of changed brightness level exceeds 10% (MEDIUM mode) of reference in more than one area.
•Condition
The alarm function performs after 10 seconds when the camera is turned on.
| • | Caution |
Vcc | OPEN | Motion detection malfunctions under the following situations. |
OPEN | Please note the conditions below. | |
Alarm |
| |
| - If shooting an object under flickering fluorescent. | |
Out |
| |
| - If leaves or curtains are swayed by the wind. | |
| CLOSE | |
|
|
0 | • Alarm keep low for 1 second after the end of moving picture. |
|
1. | The period of motion. | • This function which is Motion Detection & Sensitivity has not | |
2. | The hold time is 1 sec. | been evaluated by UL. | |
|
|
| |
| 30 |
| |
|
| ||
|
|
|
|
