LG Electronics LW690 manual Battery doesn’t need to be empty before recharging

100Safety

●Battery usage by children should be supervised.

●Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.

●Improper battery use may result in a fire, explosion or other hazard.

●For those host devices that utilize a USB port as a charging source, check the host device's user manual for the USB-IF logo or some other means to ensure that it has completed the USB-IF compliance program.

Charger and Adapter Safety

●The charger and adapter are intended for indoor use only.

●Insert the battery pack charger vertically into the wall power socket.

●Only use the approved battery charger. Otherwise, you may cause serious damage to your phone.

●Use the correct adapter for your phone when using the battery pack charger abroad.

Battery Information and Care

●Please dispose of your battery properly or take it to your local wireless carrier for recycling.

●The battery doesn’t need to be empty before recharging.

●Use only LG-approved chargers specific to your phone model since they are designed to maximize battery life.

●Do not disassemble or short- circuit the battery.

●Keep the battery’s metal contacts clean.

●Replace the battery when it no longer provides acceptable performance. The battery can be recharged several hundred times before replacement.

●Recharge the battery after long periods of non-use to maximize battery life.

●Battery life will vary due to usage patterns and environmental conditions.

●Use of extended backlighting, browser, and data connectivity kits affect battery life and talk/ standby times.

●The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on.

Explosion, Shock, and Fire Hazards

●Do not put your phone in a place subject to excessive dust and keep the minimum required distance between the power cord and heat sources.

●Unplug the power cord prior to