Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone. Using any charger other than the one included with the UX390 may damage your phone or battery.
1.Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet. (See the illustration on page 12.)
2.The charge time varies depending upon the battery level.
Battery Charge Level
The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying Low Battery. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.
Fully Charged | Empty |
Turning the Phone On and Off
Turning the Phone On
1.Install a charged battery or connect the phone to an external power source such as a cigarette lighter charger or
2.Press for about 3 seconds until the LCD screen lights up.
Note
Like any other radio device, avoid contact with the antenna while your phone is on.
Turning the Phone Off
1. Press and hold until the display turns off.
Signal Strength
Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon: The more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.
GETTING STARTED WITH YOUR PHONE
17