Liebert XDV manual Determining Placement in the Conditioned Space, Mechanical Considerations

Mechanical Considerations

4.0MECHANICAL CONSIDERATIONS

4.1Determining Placement in the Conditioned Space

Liebert XDVs should be placed above or on top of the cabinets that generate the greatest amount of heat. If heat loads are dispersed evenly throughout the room, the Liebert XDV modules may be spread out accordingly.

The Liebert XDV is engineered to fit atop computer enclosure cabinets. Figure 8, below, illustrates the unit’s dimensions and the location of pipes, the fan tray and power connections. (An optional kit is available to permit suspending the Liebert XDV from either Unistruts or from the overhead struc- ture; see 5.2 - Suspended Mounting Method.).

Figure 8 Liebert XDV dimensions

PH

Liebert XDV With

Pre-charged Option

(all dimensions except piping height are the same as for the hard-piped setup, see Table 2)

W

DT

DF

DB

H

DPN000770

Page 2, Rev. 6

Liebert XDV With Hard-piped Arrangement

Table 2	Dimensional data
Illustration			Measurement,
Key		Dimension	in (mm)
DT		Depth Top	39-1/2 (1003)
DB		Depth Bottom	29-5/8 (752)
W		Width	22-7/8 (581)
H		Height	14 (356)
		Piping Height,	18-5/8 (473)
		hard-piped
PH
		Piping Height,	19-5/8 (498)
		one-shot option
DF		Depth Front	9-7/8 (250)

8