Manuals
/
Liebherr
/
Kitchen Appliance
/
Refrigerator
Liebherr
HC 2062, HCB 2062 installation instructions Installation Instructions, HC/HCB 20
Models:
HC 2062
HCB 2062
1
1
17
17
Download
17 pages
50.41 Kb
1
2
3
4
5
6
7
8
<
>
Install
Dimension
Safety
Page 1
Image 1
HC 2062
Installation Instructions
For Fully Integrated NoFrost Combined
Refrigerator-Freezers
HCB 2062
HC/HCB 20 7083
319-00
Page 2
Page 1
Image 1
Page 2
Contents
HC/HCB 20
Installation Instructions
For Fully Integrated NoFrost Combined Refrigerator-Freezers
Contents
TO THE INSTALLER
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
Page
Blocking for Safety
Installation Guidelines
Do not use an extension cord to connect power to the unit
Area Requirements
Door swing clearence - Figure
Planning Information
HC/HCB 20 appliances do not require any
airflow is directed through the toe kick area
Planning Information
Cabinet Opening Dimensions - Figure
You can order stainless steel panels for inset installation style
Panel Dimensions - Inset Installation Style - Figure
Planning Information
Planning Information
Panel Dimensions - Frameless Installation Style - Figure
Cabinet Opening C
Refrigerator door panel D
electrical wiring located in this area which
Blocking for Safety
Mounting the anti tipping device on concrete floors - Figure
Mounting the anti tipping device on wooden floors
Cover strips - Figure
Mounting the anti tipping device in cabinets deeper than
Be sure the wooden spacer is fastened securely to the floor
Blocking for Safety
Do not install the shut-off valve behind the refrigeration unit
Safety Instructions and Warnings
IceMaker
IceMaker
IceMaker
to chapter Bleeding the ice maker in the operating instructions
Wall Appliance Anti - tipping bracket Compressor mounting plate
Adjusting the front of the drawer
Installation
Leveling the Appliance - Figure
Fasten the appliance in the recess
Figure 22 a
Mounting the attachment brackets onto the door panels - Figure
Installation
Mounting the freezer drawer
Do not overtighten. Do not use a power driver
Mounting the refrigerator door
panels - Figure
Installation
The soft-stop cylinder retracts in the detached state
12. Fasten the refrigerator panel using the same
Installation
11. Tighten the hex nuts finally
14. Click cover into place Figure
Figure 34
Mounting the ventilation grille
The ventilation opening must not be covered with a cabinet base
Installation
