Contents
HC/HCB 20
Installation Instructions
For Fully Integrated NoFrost Combined Refrigerator-Freezers
Page
TO THE INSTALLER
Contents
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
Area Requirements
Installation Guidelines
Blocking for Safety
Do not use an extension cord to connect power to the unit
airflow is directed through the toe kick area
Planning Information
Door swing clearence - Figure
HC/HCB 20 appliances do not require any
Planning Information
Cabinet Opening Dimensions - Figure
You can order stainless steel panels for inset installation style
Panel Dimensions - Inset Installation Style - Figure
Planning Information
Refrigerator door panel D
Panel Dimensions - Frameless Installation Style - Figure
Planning Information
Cabinet Opening C
Mounting the anti tipping device on wooden floors
Blocking for Safety
electrical wiring located in this area which
Mounting the anti tipping device on concrete floors - Figure
Blocking for Safety
Mounting the anti tipping device in cabinets deeper than
Cover strips - Figure
Be sure the wooden spacer is fastened securely to the floor
IceMaker
Safety Instructions and Warnings
Do not install the shut-off valve behind the refrigeration unit
IceMaker
IceMaker
to chapter Bleeding the ice maker in the operating instructions
Wall Appliance Anti - tipping bracket Compressor mounting plate
Fasten the appliance in the recess
Installation
Adjusting the front of the drawer
Leveling the Appliance - Figure
Figure 22 a
Mounting the attachment brackets onto the door panels - Figure
Installation
panels - Figure
Do not overtighten. Do not use a power driver
Mounting the freezer drawer
Mounting the refrigerator door
Installation
The soft-stop cylinder retracts in the detached state
14. Click cover into place Figure
Installation
12. Fasten the refrigerator panel using the same
11. Tighten the hex nuts finally
Installation
Mounting the ventilation grille
Figure 34
The ventilation opening must not be covered with a cabinet base