4.15NAVIGATION BUTTON
Provides simple forward, back, up, and down software navigation as well as level, time, and speed (treadmill only) workout adjustments. While setting up a workout use the Left/Right arrows to scroll through workout setup options, and then use the Up/Down arrows to adjust the values. During a workout, use the Left/Right arrows to scroll between options like level and time, and then use the Up/Down arrows to adjust those values.
4.16ENTER / START BUTTON
The ENTER / START button can be pressed at any time during initialization to begin a quick start 30 minute manual workout. During workout setup it is used as a selection key when choosing program parameters.
4.17RESET BUTTON
Press this button when programming a workout to clear incorrect data, such as weight or age. Pressing RESET two times consecutively during a workout stops it immediately, at which point, the user returns to the select workout screen.
4.18RACE MODE BUTTON
Press this button once during a MANUAL, RANDOM, HILL, EZ INCLINE, or SPORTS TRAINING workout to turn on Race Mode. This mode allows the user to race against a customized simulated pace. Press this button again while Race Mode is on to turn it off. See section 5.4, How to Use Race Mode.
4.19GOAL WORKOUTS BUTTON
Press this button once to enter into the Goal Workouts selection screen. There are three goal work outs; Calorie goal, Target Heart Rate goal and Distance goal. The user sets their own goal for each workout.
4.20ENERGY SAVER BUTTON
The Energy Saver Mode is used to minimize the power being pulled from the wall when the equipment is not in use. The unit will automatically go into Energy Saver Mode 5 minutes after ending a workout. Press the ENERGY SAVER button to either “wake up” the console or put it into the Energy Saver Mode. Energy Saver can be turned off in the Settings Menu. An indicator LED will flash while in Energy Saver Mode.
15
