Life Fitness T3i, T5I 1.2 S

1.2 SETUP

Read the Operation Manual before setting up the Life Fitness treadmill. Place the treadmill where it will be used

before beginning the setup procedure.

The Life Fitness Treadmill is intended for use on a normal 120-Vol t electrical circuit in the United States and

Canada. The following table provides the current rating for this product b ased on supply voltage. Make sure that

this treadmill model supports the proper line voltage for the install ation location before plugging into the outlet.

Supply Voltage

(VAC) Frequency (Hz) Maximum Current

(Amps)

100 50 / 60 14.4

120 50 / 60 12

200 50 / 60 7.2

230 50 / 60 6.3

240+ 50 / 60 6.0

GROUNDING INSTRUCTIONS

This Life Fitness product must be properly grounded. If the unit malf unctions or breaks down, proper grounding

provides a path of least resistance for the electric current, which reduces the risk of shock to anyone touching or

using the equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding

conductor and a grounding plug. The plug must be inserted into an outle t that has been properly installed and

grounded in accordance with all local codes and ordinances.

A temporary adapter MUST NOT BE USED to connect this plug to a 2-pole receptac le in North America. If a

properly grounded, 12 AMP outlet is not available, a qualified electr ician must install one.

DANGER: A risk of electrical shock may result from improper connection of the equipment-groun ding conductor.

Check with a qualified electrician if in doubt about proper ground ing technique. DO NOT modify the plug provided

with the product. If it will not fit an electrical outlet, have a proper out let installed by a qualified electrician.

DANGER : Tout branchement incorrect du conducteur de mise à la terre de l’appareil peut causer un risq ue de

décharge électrique. Consulter un électricien qualifié en cas de doute sur la technique de m ise à la masse. NE

PAS modifier la fiche de l’appareil. Si elle ne s’adapte pas sur une prise électrique, faire installer une prise correcte

par un électricien qualifié.