Life Fitness T3i, T5I 5

5USER MENU

The USER MENU makes it possible to change certain settings in the treadm ill software

Enter the USER MENU BY using one of two procedures:

Press the STOP key twice, and then hold down the ENTER key. The unit g oes through a “warm” reset and beeps

three times, indicating that the USER MENU has been activated.

OR, hold down the ENTER key, and turn the treadmill on. The mess age "USER MENU" will appear. After about

one second, the MESSAGE CENTER displays the first menu item.

Use the ENTER key to scroll forward through the menu items. Use the STO P key to scroll backwards. There are

two ways to exit the menu: Press the STOP key continuously to return to the b eginning of the menu; OR switch off

the treadmill. Doing so causes all settings to be saved.

The User Statistics mode is used to display the current, accumulated stat istics of the workouts stored under the My

Workouts feature. See Section, 5.3, titled Description Of User Menu Items.

To access statistics for a specific stored workout, press the MY W ORKOUT key repeatedly until the name of that

stored workout appears in the MESSAGE CENTER. Then, press ENTER. Or, press the MY WORKOUT key once,

and then use the ARROW keys to scroll through the names. When the desir ed name appears, press ENTER.

Use the TIME ARROW keys to scroll backward and forward through the stat istics. If the value for any statistical

item is greater than the listed maximum, the MESSAGE CENTER displ ays dashes, "----".

To clear statistics to zero: Press the SPEED UP ARROW key. The MESSAGE CENTER displays, "PRESS SPEED

DOWN ARROW KEY TO CLEAR STATS". Press the SPEED DOWN ARROW key. The statistics are cleared, and

the MESSAGE CENTER displays, "STATS CLEAR". If any other key is press ed after the SPEED UP ARROW is

pressed, the console cancels the clearing of the statistics. To re-activa te the clearing process, press the SPEED

UP ARROW key again.

SETTINGS

The values for three settings can be adjusted and saved: Pause Tim e, Sleep Time, and Units. Cycle through the

settings using the UP and DOWN ARROW keys. Use the TIME ARROW keys to change t he settings. Any

adjustments are saved automatically. Revert a setting back to its defau lt value by pressing the COOL DOWN key

Use the UP and DOWN ARROW keys to toggle between displays of the current sof tware version for the console,

and for the Motor Controller. The MESSAGE CENTER displays the Console Software Version number as

"CONSOLE VER=XX.X', where xx.x is the version number. For the Motor Controller, the MESSAGE CENTER

displays "MOTOR VER = XX.X".