Lifescan blood glucose monitoring system manual Entering Set-Up Mode, Display of Last Result

Entering Set-Up Mode

1.Make sure the meter is off.

2.Press and hold down the green C button.

3.Press and release the blue power button while holding the C button.

4.Release the C button.

In the set-up mode, the current set- ting for each of the three changeable features is automatically displayed in sequence. Each setting flashes on the display for five seconds. While it flashes, the setting may be changed by pressing the C button. After the last feature is displayed,

the meter automatically turns off. To re-enter set-up mode, begin with Step 2.

Display of Last Result

The SURESTEP® Meter is pre-set to automatically display your last test result when you turn on the meter.

After you release both the power and C buttons, this symbol will flash on the display:

SETTINGS

53