Lifescan blood glucose monitoring system manual Before Testing, Check the Code

CHECKING

Follow the test procedure, using SURESTEP® Glucose Control Solution instead of blood.

Before Testing, Check the Code.

After turning the meter on, the last result appears, followed by the CODE symbol and number. If the code on the meter does not match the code on the test strip package, press the green C button until the codes match.

▼ C Button

(Example)

Step 1: Apply a Small Drop of Control Solution.

After shaking the control solution vial, apply one drop of control solution to the pink test square.

Note: Applying too much control solution may cause out-of-range results and dirty the meter.

14