Lifescan blood glucose monitoring system manual Beep Signals

If you wish to change the unit of measurement to mmol/L, press the C button. This symbol will flash on the display.

Then, wait for the next feature set- ting (beep signals) to appear.

Beep Signals

The SURESTEP® Blood Glucose Meter uses beeping tones to signal various steps in the meter

procedures. However, these tones do not indicate that the procedures are being performed correctly. The meter is pre-set to emit three differ- ent beep signals:

1.A single short beep signals each step in the test procedure.

2.A single long beep accompanies error messages, a “ ” result, and certain mistakes in doing the test procedure.

3.A three-tone beep sounds when the meter displays a test result and when the meter is in set-up mode on the beep signal feature.

SETTINGS

55