SPECIFICATIONS
Type | K462 |
|
|
Rated DC Output (For use on 20 ampere | 90 amps @ 18 volts |
branch circuit) | 20% duty cycle |
Maximum DC Output (For use on 25 |
|
ampere branch circuit with optional | 100 amps @ 17 volts |
K467 input line cord installed) | 30% duty cycle |
CSA Rated DC Output | 63 amps @ 20 volts |
(For use on 15 ampere branch circuit) | 20% duty cycle |
Input Power @ CSA rated Output | 115 volts |
AC only | 60 hertz |
| 15 amps |
Maximum Open Circuit Voltage | 28 volts |
| 115 volts |
Input Power @ Rated Output, AC only | 60 hertz |
| 20 amps |
| 115 volts |
Input Power @ | 60 hertz |
Maximum Output, AC only | 25 amps |
Wire Speed Range | 50 to 400 in./min |
| (1.3 to 10.2 m/min) |
Wire Sizes | .023 |
| .035" (0.9 mm) |
Spool Sizes | 8" OD x 2" ID x 2.2" wide |
| (200 mm x 50 mm x 56 mm) |
| 4" OD x 5/8" ID x 1.7" wide |
| (100 mm x 16 mm x 43 mm) |
Weight | 54 lbs (24.3 kg) |
Dimensions (H x W x D) (Less Handle) | 12" x 9 3/4" x 16 1/2" |
| (305 mm x 248 mm x 419 mm) |
|
|
1)Requires optional Innershield Welding Kit
INSTALLATION
SAFETY PRECAUTIONS
●Read the safety precautions at the beginning of this Operator's Manual before proceeding.
●Only personnel that have read and under- stood the
●Machine must be plugged into a receptacle which is grounded per any national, local or other applic- able electrical codes.
●The
UNPACKING THE SP-100 (K462)
Unpack the
2.Gun and cable assembly(1) — ready to feed .025" (0.6 mm) diameter wire (also .023 and .024 diam- eter wire).
3.Literature envelope which contains:
a)This operating manual, and
b)A contact tip for .030" (0.8 mm) diameter wire. 4.10 ft (3.0 m) work cable.
5.Work clamp.
(1)K474 model gun is ready to feed .035 (0.9 mm) Innershield with conversion parts for .030 (0.8) wire.
– 8 –
