Lincoln Electric SVM157-A service manual Accessories, Drive Roll Kits, K363P READI-REEL Adapter

C-2 ACCESSORIES C-2

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

DRIVE ROLL KITS

Refer to Table C.1 for various drive roll kits that are available for the POWER MIG 200.The item in Bold is supplied standard with the POWER MIG 200.

Wire	Size	Drive Roll Kit
Solid	.023”-.030” (0.6-0.8 mm)	KP1696-030S
	.035” (0.9 mm)	KP1696-035S
Steel
	.045” (1.2 mm)	KP1696-045S
Cored	.035” (0.9 mm)	KP1697-035C
	.045” (1.2 mm)	KP1697-045C
Aluminum	3/64” (1.2 mm)	KP1695-3/64A

TABLE C.1

3/64" (1.2 mm) ALUMINUM FEEDING KIT (K1703-1)

This kit helps push feeding aluminum through standard machine feeder and gun. It provides gun and wire drive conversion parts to weld with 3/64" (1.2 mm) aluminum wire. 5356 alloy aluminum wire is recommended for best push feeding performance.

Kit includes drive rolls and wire guide plate for the wire drive, liner and two contact tips for the gun, along with installation instructions.

K363P READI-REEL ADAPTER

The K363P Readi-Reel Adapter mounts to the 2" spin- dle. It is needed to mount the 22-30 lb. Readi-Reels.

DUAL CYLINDER MOUNTING KIT (K1702-1)

Permits stable side-by-side mounting of two full size (9" dia. x 5' high) gas cylinders with “no lift” loading. Simple installation and easy instructions provided. Includes upper and lower cylinder supports, wheel axles and mounting hardware.

ALTERNATIVE MAGNUM GMAW GUN AND CABLE ASSEMBLIES

The following Magnum 250L gun and cable assemblies are separately available for use with the POWER MIG

200.Each is rated 200 amps 60% duty cycle and is equipped with the integrated connector, twist-lock trig- ger connector, fixed nozzle and insulator, and includes a liner, diffuser, and contact tips for the wire sizes spec- ified:

		English Wire	Metric Wire
Length	Part No.	Size	Size
10' (3.0 m)	K533-1
12' (3.6 m)	K533-2	.035– .045"	0.9 – 1.2 mm
15' (4.5 m)	K533-3
10' *3.0 m)	K533-4
12' (3.6 m)	K533-5	.025– .030"	0.6 – 0.8 mm
15' (4.5 m)	K533-6

TABLE C.2

MAGNUM GUN CONNECTION KIT (Optional K466-6)

Using the optional K466-6 Magnum Connection kit for the POWER MIG permits use of standard Magnum 200, 300 or 400 gun and cable assemblies.

SPOOL GUN AND ADAPTER KIT (K1809-1)

The K1809-1includes the Magnum 250SG Spool gun and the adapter kit for connecting the spool gun to the Power MIG 200.

The Adapter Kit provides toggle switch selection between the machine’s use with its feeder gun or the spool gun for same polarity welding with different wire and gas processes.

The kit includes a spool gun adapter module assembly with a single connecting plug and trigger switch, a rear gas inlet, fitting hose, solenoid valve assembly, and mounting hardware with installation and operation instructions.

Return to Section TOC

Return to Master TOC

WARNING

Remove all input power to the POWER MIG 200 before installing the Spool Gun and Kit.

POWER MIG 200