ADSL2 Gateway with 4-Port Switch

Factory Defaults

Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your settings, click Yes.

To begin the restore process, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

Firmware Upgrade

The ADSL Gateway allows you to upgrade firmware for the LAN (network) side of the Gateway.

Upgrade from LAN

To upgrade the Gateway’s firmware from the LAN:

1.Click the Browse button to find the firmware upgrade file that you downloaded from the Linksys website and then extracted.

2.Double-click the firmware file you downloaded and extracted. Click the Upgrade button, and follow the instructions there.

Chapter 5: Configuring the Gateway

Figure 5-34: Factory Defaults

Figure 5-35: Firmware Upgrade

35

The Administration Tab

Page 40
Image 40
Linksys AG241 manual Factory Defaults, Firmware Upgrade, Upgrade from LAN