Emc | Linksys SFE2010P instruction

Safety	UL 60950-1
	IEC60950-1 CB / TUV/Rh
	CSA-C22.2 No. 60950
	EN 60950
	AS/NZS 60950-1
	C-Tick

EMC	FCC Part 15 (CFR 47) Class A
	ICES-003 Class A
	EN 55022 Class A
	CISPR22 Class A
	EN 55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1

Dimensions	Metric: 440 mm (W) x 375 mm (H) x 44 mm (D)
	English: 17.32 in. (W) x 14.70 in. (H) x 1.73 in. (D)

Unit Weight	SFE2010 —4.94kg, or10.89 lbs. (174.25 oz.)
	SFE2010P — 4.94kg, or10.89 lbs. (174.25 oz.)

Power	SFE2010 — 100-240V 47-63Hz, Internal, Universal; Also equipped with external
	redundant power supply connector for external power supply, -48VDC
	SFE2010P — 100-240V 47-63Hz, Internal, Universal; Also equipped with external
	redundant power supply connector for external power supply, -48VDC

SFE2010/SFE2010P Administration Guide

63

Image 66

Linksys SFE2010P manual Emc

Contents

Port 10/100 Ethernet Switch Table of Contents Contacts Welcome What’s in this User Guide? Getting to Know the SFE2010/SFE2010P SFE2010/P Front Panel Getting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Sample Network Configuration Maximum Cabling Distances Before You Install the Switch Placement OptionsDesktop Placement Rack-Mount Placement Connecting the Cables Wall-Mount Placement Connecting Devices Connecting to the Switch with the Web-Based Utility Using Menus in the Web-Based Utility Viewing On-line Help Using the Console Connecting to Your Switch with HyperTerminal Using the Console Set the serial port settings as follows Connecting to the Switch with Telnet Logging On to the ConsoleSelecting Menu Options and Actions Using the Switch Main Menu System Configuration System Information To open this screenTo open this menu Versions General Information Management Settings To change the system contact, system name, and location Serial Port Configuration Telnet ConfigurationTo change the baud rate of the serial port SSH Configuration To change the time-out setting SSH Server Configuration To change SSH Server settings To change SSH Crypto Key Generation settings Username & Password Settings To generate the crypto key Security Settings To change User & Password settings SSL Generate Certificate To edit and execute a certificate Disable Active Management Access Profile To disable the active management access profileShow Certificate Default Vlan Setup Vlan Management IP Configuration To edit the Vlan ID IPv4 Address Configuration IPv6 Address Configuration To edit the IPv4 address settingsTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings IPv6 Default Gateway To edit the IPv6 default gateway settings To change the Http settings Http ConfigurationHttps Configuration To open the screen Network Configuration To change Https settings To change the IP address To begin the ping test Ping IPv6 To begin the trace route test TraceRoute IPv6 Upgrade / Backup IPv4 File Management To enter the IPv6 Upgrade/Backup file name and location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To download a file from the specified location To enter the active image settings Active Image Reboot System Restore System Default SettingsReset to Factory Settings To restore system default settings Stack Configuration Port Status Port Status PoE Status Port Configuration Port Settings PoE Settings To configure the ports System Mode Layer 2 / Layer 3 Selection To configure the PoE settings To edit the system mode or stacking mode Help Logout US/Canada Contacts EU Contacts Customer Site Survey Yes Limited Warranty Exclusions and Limitations Obtaining Warranty Service Technical Support Obtaining Warranty Service Industry Canada Statement EC Declaration of Conformity Europe Specifications Radius Vlan EMC 080312A-LB